Diamond drilling offers an affordable and cost-effective manner to form openings of hole drillings without any sound, vibration and disturbance as a result of minimizing disruption. Diamond core drilling term is generally used for forming single holes like service holes through wall, floors, and ceilings. Suitability of this drilling process is based on normal construction diameters range between 20mm to 600mm but other sizes can also be carried out. The diamond core drilling technique can be used to cut concrete blocks and bricks with the facilities of dust extraction.
Stitch drilling is effectively used to cut reinforced concrete with consistency and under controlled situation. Since using this method, engineers are able to cut openings successfully and remove unnecessary concrete blocks and structure. Through Diamond drilling hole openings in heavily reinforced concrete and blocks is not possible whereas stitch drilling can reduce the length of pre-cast slab and concrete beams by cutting larger openings as per requirements and manageable sections.
Distinguishing Between Diamond & Stitch Drilling
Diamond Drilling is a unique technological method which has numerous benefits in the comparison of conventional drilling techniques. Diamond drilling bit is mounted over the top of the machine which makes it possible to drill holes faster and deeper with the higher accuracy. It uses advanced ranges of materials than the non-diamond drilling process. As we all know that if there is ant advantage then the disadvantage will also be there. The major disadvantage of diamond drilling is that there is a limit of the sizes of drill bits which don’t allow to dig and make drill holes bigger more than 1500mm. But this drawback can be overcome by the process of stitch drilling.
Stitch drilling allows you to drill holes over the building and walls of almost any kinds of shapes and sizes. There are many options available in the market to drill large holes, but there are a number of situations where stitch drilling fits best comparatively to the diamond drilling process. Firstly, diamond drilling could be undertaken in specific and confined places whereas, stitch drilling process helps to cut and drill specific spaces even when the sites are too cramped and the diamond drilling process is not enough to make this task done.
Stitch or Diamond Drilling: Which Drilling Process is More Suitable?
If contractors and engineers need to drill holes from 5mm to 1500mm diameter then diamond drilling is the suitable handheld equipment which is used for drilling through electricity or large hydraulic bits for dig up to the expected length. Whereas stitch drilling process is used to continue the series overlapping hole drills in order to make openings of any sizes through any depth and thickness.
Second, diamond drilling is only suitable for the use of underwater drilling, but this process is enough for proper water treatment facilities such as cutting of off-shore platforms. So, to manage the whole range of functions stitch drilling is suitable and required. While using stitch drilling for water treatment, it produces too much dust during the drilling process, but the drilling process with diamond bits could be the best option which produces no dust while drilling holes over the building and concretes.
Many professionals use stitch drilling with the diamond drill bit mounted on it to maintain a sterile and clean atmosphere during construction projects in hospital and school areas. Stitch drilling is an ideal concrete cutting technique which has helped engineers to overcome from the drawbacks diamond core drilling. It can be carried out in any tight and cramp locations and allows perfect drilling to form openings without taking too much time. This means that depending on the concrete cutting process, stitch drilling is better than diamond drilling method.