Stainless steel cleanroom tables are produced from various sorts and gauges or thicknesses of stainless. Here are a couple of rules for picking a cleanroom table for a cleanroom, lab room, or clean condition.
Stainless steel cleanroom furniture clearly should be purified viably to reduce cleanroom contamination. However, consideration should be given to erosion resistance, especially with the utilization of some harsh cleanroom disinfectants and biocides.
Stainless steel is normally shielded from erosion by a thin layer of chromium oxide. Oxygen from the environment joins with the chromium in the stainless steel to frame this passive chromium oxide film that shields it from further consumption. Any pollution of the surface by dirt, or different materials, hinders that passivation procedure and traps destructive operators, decreasing corrosion security.
In this context, you will get a brief idea of varieties of stainless steel cleanroom tables using in the laboratory.
- Cleanroom Table
The stainless steel cleanroom table ought to be made of a higher grade 304 or 316 tempered steel. The gauge of stainless steel would rely upon if the table will be utilized for holding heavy equipment. If so a heavier gauge ought to be picked, for example, 14 gauge or 16 gauge. The underside of the work surface ought to have cross braces to guarantee quality.
- Cleanroom Workstation
A stainless steel cleanroom workstation with 12″ wide overhead cantilevered racks allows extra space in the work territory without jumbling the tabletop. The overhead racks can be made of stainless steel or chrome. The table base can have a lower rack, C casing or H outline which would permit the table to be utilized in a sitting position.
- Sterile Cleanroom Table
An electropolished stainless steel table gives corrosion resistance when cleanroom cleaners and clean disinfectants are utilized to wash down tools. The electropolished table is perfect, smooth and has a “reflect” finish. A stainless steel cleanroom table will rust if the chromium oxide layer superficially is expelled from a scratch or chlorine solution. The electropolishing procedure expels the metal particles from the stainless steel which would cause consumption from the chlorine.
- Semiconductor Cleanroom Table
A basic clean condition utilized in the semiconductor industry regularly requires a perforated stainless steel table to be utilized. The perforated work surface permits the HEPA or ULPA filtered cleanroom air to go through the holes in the work surface and keeps the region clean of airborne particulates. The stainless steel can have a brushed and also electropolished finish. If the budget is a major concern a stainless steel wire rack with four posts and a lower rack or C casing can work as a table.
Global lab supply offers every type of high quality and affordable lab tools including stainless cleanroom tables. They also provide the lab tools but also assist you with enough warranty periods to fix problems clearly if there occur anything.
If you have any inquiries regarding our best high-end customer services and support, don’t hesitate to connect with us. We’re always here to help you each and every time.